شاركنا تاريخ ميلادك!
تاريخ الميلاد
تاريخ الميلاد المدخل غير مكتمل يرجى ادخال تاريخ ميلاد صحيح
×
highpoint rocketraid SATA منفذ pci-express RAID تحكم
387.63 ريـال

highpoint rocketraid SATA منفذ pci-express RAID تحكم

بواسطة  High Point، اكسسوارات كمبيوتر و لاب توب -  129 تقييم

387.63 ريـال 

الشحن مجاني التفاصيل
هذا المنتج يشحن و يباع من قبل Amazon Global Store US
العلامة التجارية
High Point
هل يتطلب هذا المنتج بطارية او يحتوي بطارية
ميزات المنتج:
  • 2nd Generation SATA 6Gb/s performance
  هل هذه السلعة غير مناسبة؟ بلغ عن اساءة

بلغ عن اساءة

ساعد سوق في تحديد السلع غير المناسبة عن طريق الإبلاغ عن الإساءة.

شكراً لك!

لقد تم استلام ملاحظتك، سوف نقوم بمراجعتها بأقرب وقت.

3 قطع متوفرة فقط!
البائع
  • يتم بيع المنتجات العالمية من الخارج وقد تختلف عن المنتجات المحلية، بما في ذلك الملاءمة وتصنيف العمر ولغة المنتج ووضع العلامات أو التعليمات.
  • خدمة العملاء محلية مع توفر خدمة الإرجاع السهلة خلال 30 يوماً.
  • إن أي تفاصيل عن كفالة المنتج تابعة للمشتريات التي تتم في الولايات المتحدة الأمريكية. قد لا تكون الكفالة سارية المفعول في المملكة العربية السعودية.
  • يشمل السعر جميع رسوم الاستيراد والضرائب عند الشراء.

تطبق الشروط المنفصلة

معلومات المنتج

  •  

    المواصفات

    UPC-A
    643653644056
    العلامة التجارية
    High Point
    نظام التشغيل
    سعة التخزين
    UPC-A
    643653644056
    العلامة التجارية
    High Point
    نظام التشغيل
    سعة التخزين
    المادة
    سرعة الـ CPU
    الرقم المميز للسلعة
    2724532129142
    ASIN
    B00C7JNPC2
    سعة التخزين
    سعة القرص الصلب
    اللون
    اللون
    دي جي
    هل يتطلب هذا المنتج بطارية او يحتوي بطارية
    إقرأ المزيد
  •  

    الوصف:

    rocketraid 600 Series Hba's Are The Ideal 6gb/s Sata Storage Solution For Any Pc Or Mac. Available With 1 To 4 Mini-sas/sata/esata Ports In Internal And External Configurations, Rocketraid 600 Series Hba's Are Capable Of Supporting Point-to-point And Port Multiplier Based Storage Devices. The

    rocketraid 600 Series Hba's Are The Ideal 6gb/s Sata Storage Solution For Any Pc Or Mac. Available With 1 To 4 Mini-sas/sata/esata Ports In Internal And External Configurations, Rocketraid 600 Series Hba's Are Capable Of Supporting Point-to-point And Port Multiplier Based Storage Devices. The Compact Pcb Design, Available Low-profile Form Factor And Industry Standard Port Connectors Make Any Storage Upgrade, Integration Or Expansion Project A Snap. Rocketraid 600 Hba's Deliver Highpoint's Industry-proven Hardware Assisted Raid Technology, And A Comprehensive Raid Management Suite. Customers Can Quickly And Easily Configure A Wide-range Of Storage Configurations, Including Raid 0, 1, 5, 10 And Jbod Arrays.highpoint's 2nd Generation Rocketraid 600l Series Introduce A New Hybrid-port Configuration. The Rocketraid 642l Hba Features Both Internal And External 6gb/s Sata Ports And Is An Ideal Hba Platform For Applications That Require Built-in Storage Expansion Capabilities. The Internal Ports Provide Direct Connections For Up To 2 Sata Hard Drives And Ssd's, While The External Ports Are Capable Of Supporting An Additional 10 Sata Devices When Used In Conjunction With Port-multiplier Capable Storage Enclosures.

 

تقييمات المستخدمين

0
لا يوجد تقييمات بعد
كن أول من يقيِّم هذا المنتج
قيِّم هذا المنتج:

شكراً على التقييم ! اكتب تقييماً مفصلاً
3.6
3.6 من 5
129 تقييم
5 نجوم
(52)
4 نجوم
(25)
3 نجوم
(11)
2 نجوم
(17)
1 نجمة
(24)
قيِّم هذا المنتج:

شكراً على التقييم ! اكتب تقييماً مفصلاً
التقييمات الأكثر فائدة على Amazon.com
  • Good for JBOD eSATA
    بواسطة David Bakin في 24 May 2014

    I have been using this card for a year for two external drives connected to the eSATA ports with no complaints about speed or accuracy (i.e., no drive errors read or write). That should get a controller 5 stars since what you want is speed while accurate. (This is with Windows Server 2012, and the driver in AHCI mode not RAID mode.)

    However:

    1 star removed for absolutely annoying and unnecessary 30 second delay in this card's BIOS at each boot to "scan for drives". Other SATA controllers don't do this. It is impossible to avoid via configuration of any kind. While your server is stable and running at weeks between reboots this 30 second delay isn't important, but when you go into a software/hardware configuration mode (e.g., upgrading the OS or replacing failed drives) then a 30 second delay for each reboot gets frustrating real quickly.

    Second star removed for this card not working with Windows Storage Spaces. The problem (which you can find in various postings on the web) is that this controller doesn't assign distinct "uniqueid" values to each attached drive, as a result, some drives attached to this card will not show up as available to be assigned to a storage pool. You'd think calling a field "uniqueid" in the specification would be a sufficient hint to a firmware programmer that the values assigned by the driver ought to be, you know, UNIQUE i.e., distinct, but not in this case.

    22 شخصاً وجدوا هذا التقييم مفيداً

    تم النشر على Amazon.com

  • Get a Slot Fan
    بواسطة Titleguru في 15 December 2018

    These cards are much maligned, and rightly so. They're easy to use, but have a dependability issue. I finally came across the solution that has created an excellent solution. I bought a slot fan for the adjoining slot. Keeps that card cool as can be. I've not heard a squawk or error out of the raid set since I found this solution. Works perfectly. Had the same thing happen on an LSI Commercial Card, except in that instance I screwed a mini-fan right to the heat sink. Runs cool as can be. Lesson learned.

    شخصان وجدا هذا التقييم مفيداً

    تم النشر على Amazon.com

  • Great potential, but needs SERIOUS 64-bit driver improvement work
    بواسطة SpikerJack في 19 March 2015

    Was initially very excited about this card, as it had both the e-SATA port multiplication AND 6gb/sec SATA throughput I needed for my drive array attached to my Windows Server 2012-based micro server. But stability of late has been declining due to timeout response errors directed at the card - disconnecting my drive array and throwing my server into near-constant turmoil. Turns out that the drivers for x64 Windows OS platforms apparently are to blame, as others have reported similar issues and when testing the card and array on a 32-bit Windows OS, 100% reliability is returned. The "latest" x64 Windows drivers for this card on the Highpoint site are from 2012...so not sure why there hasn't been more work done to improve stability on a card that must have extensive usage on various x64 server machines. I'm one card/driver timeout away from switching to a more reliable e-SATA/RAID card...even if its only 3gb/sec.

    7 أشخاص وجدوا هذا التقييم مفيداً

    تم النشر على Amazon.com

  • You need this info.
    بواسطة Joshua Montgomery في 19 June 2019

    Alright, so I went and got one for myself, because I was having difficulty setting up a RAID on my motherboard through my own methods. After some research, I came to the conclusion that having a RAID controller on a PCIE slot (PCIE x1 FYI) would handle the RAID, and avoid the necessary overhead to the system.

    The unit is quite easy to install. Just find an open PCIE slot, bump out the grate covering the slot on the back of the PC case, and slide into the slot. The unit came with SATA cables (I think they're SATA III, but I am using my own that are for sure SATA III), and a low-profile din if needed.

    Once the hardware is installed, boot up your PC and navigate to HighPoint's website. You will need to download two items in order to set up your RAID. For ease of discovery, I would recommend Googling to find the relevant page on HighPoint's website - it isn't very intuitive, but Google's spiders have found it no problem for you. So, download BOTH the drivers for the card, AND the WebGUI. Then extract both folders, and install the WebGUI. For the RAID drivers, you will need to navigate to Device Manager, find it in the list of items (it will probably have a yellow exclamation mark on its icon), and then Right Click>Update Driver. From there, you then need to search manually on your computer for the drivers. Navigate to the folder that you extracted just a bit ago for the drivers, and choose the folder that fits your system (32 or 64 bit). The utility will finish, and successfully mount the controller. Then, restart your computer so that the computer can properly initialize the controller.

    Now, we can finally begin using the hardware. Launch the WebGUI, and navigate through the utility. Confirm that the controller is finding the drives correctly, and navigate to a tab that has "Array" on the left selection. From here, you can begin a simple utility that will create your desired RAID.

    Lastly, once you have finished setting up the RAID, open up Windows Explorer (like you would to open a file somewhere on your computer), Right Click on your computer, and then click on Manage. From here, select Disk Management under Storage. You should see a new drive with the same size that you set up during the RAID utility, and should also have a black (not navy blue) bar across the top. Right Click, select "New Simple Volume", and follow the Setup Wizard to create your new drive.

    Once you have set up the drive, you have finished, and can begin using it just as you would with any other drive. Congratulations! You now have an active RAID array on your PC.

    شخص واحد وجد هذا التقييم مفيداً

    تم النشر على Amazon.com

  • Solid card for use with basic RAID sets
    بواسطة Kevin Patrick في 29 August 2016

    I've been using HighPoint RocketRAID cards in Macs for years, and I've always found them to affordable and reliable for maintaining external RAID sets for non-mission critical applications. For this card, I needed to create a large RAID 5 volume out of 7 4TB drives in a 15 drive eSATA port multiplier enclosure. Using the web-based software, I was able to quickly create the RAID set, which then popped up as a volume to be initialized on the Mac. I use the volume as one of my rotating backup sets with Retrospect backup software, and it's quite speedy and stable. It's certainly not even close to being as fast as other types of external interfaces like miniSAS or fiber channel, but it gets the job done for this particular application. I'm going to give 4 stars instead of five due to its x2 PCIe capability (most other RAID cards are at least x4) and its occasional inability to remount volumes once inserted into the eSATA unit without a restart (basically a hot swap).

    شخصان وجدا هذا التقييم مفيداً

    تم النشر على Amazon.com

إعلانات مُموَّلة لك

×

الرجاء تأكيد رقم هاتفك الجوال لإكمال عملية الشراء

سنقوم بإرسال رسالة نصية تحتوي على رمز التفعيل، الرجاء التأكد من رقم هاتفك الجوال ادناه، ثم انقر على زر "أرسل رمز التفعيل".